|
 Most of the videos listed below were shot on MiniDV and captured using a Pinnacle Systems DV500Plus. Then encoded in Adobe Premiere using LSXMpeg encoder. MPEG Format is MPEG1 at 320x240. If you have a broadband connection then you are probably safe streaming these videos into your media player. If you are on dial-up, then I suggest right-clicking on the links and saving to your desktop before attempting to play these
More recently I have started encoding my videos in Windows Media 9 format. I think that the quality is better than before and the videos stream more efficiently.
August 23, 2006 - Front Bodywork (First Body on Car) -
Bala Bodywork - 10.6MB mpg- Video
taken with my Sony DSC-w1 camera
July 31, 2006 - New Dash and headlamp configuration -
Bala New Dash - 10.6MB mpg- Video
taken with my Sony DSC-w1 camera
June 7, 2006 - Driving La Bala. On the road- first time in years -
Bala drive by Jason Zwiebel- 8.8MB mpg- (poor quality) Video
taken with my Sony DSC-w1 camera
Bala drive by John Lee - 6.1MB mpg- (poor quality) Video
taken with my Sony DSC-w1 camera
Bala drive by Graber - 5.6MB wmv- (decent quality) Video
taken with Jason's Sony camera
May 30, 2006 - Bala Plug Removal of Molds -
Bala Front Mould Removal - 8.8MB wmv- Video
taken with my DV Camcorder shows the current state of progress on
La Bala bodywork. Moulds being removed from the plug.
Bala Bonnet Mould Removal - 8.9MB wmv- Video
taken with my DV Camcorder shows the current state of progress on
La Bala bodywork. Moulds being removed from the plug.
Bala - Destruction of Plug - 14.3MB wmv- Video
taken with my DV camcorder shows the current state of progress on
La Bala bodywork. Destruction of the Plug to access the chassis underneath.
March 23, 2006 - Bala Plug Ready for Molds -
Bala Front of Plug Finished - 16.7MB mpg- Video taken with my digital camera shows the current state of progress on La Bala bodywork. Plug painted and completely ready for mold making
Bala Rear of Plug Finished - 14.4MB mpg- Video taken with my digital camera shows the current state of progress on La Bala bodywork. Plug painted and completely ready for mold making
January 14, 2006 - Bala Plug Painting -
Video 1 - 48.7MB mpg- Video taken with my digital camera shows the current state of progress on La Bala bodywork. Plug painted almost ready for mold making
February 28, 2005 - Bala Body Walkarounds -
Video 1 - 3.5MB wmv- Video taken with my digital camera shows the current state of progress on La Bala bodywork. 1 of 3
December 13, 2004 - Bala Body Walkarounds
Video 1 - 1.79MB WM9- Video shows the current state of progress on La Bala bodywork. 1 of 3
Video 2 - 8.85MB WM9- Video shows the current state of progress on La Bala bodywork. 2 of 3
Video 3 - 3.93MB WM9- Video shows the current state of progress on La Bala bodywork. 3 of 3
Headlamps - 8.83MB WM9- Video shows the current state of progress on La Bala headlamp area.
October 27, 2004 - Bala Body Walkaround 1.6MB WM9- Video shows the current state of progress on La Bala bodywork. Passenger side foamed in, headlight covers designed and painted onto bodywork.
October 10, 2004 - DIY Tail Light Housings - 14.8MB WM9 I sourced some cast ali tubes from the scrap yard and machined them to accept 4" truck style LED tail lights. Here I describe how the light fits inside the housing with a rubber gasket.
October 9, 2004 - Bala Body Walkaround 13.3MB WM9- Video shows the current state of progress on La Bala bodywork. Not a lot of progress since the last video. But I have put a lot of effort into refining the shape to my liking.
August 16 , 2004 - DIY RivNut Install 7.8MB MPEG1- la Bala has a completely flat underbody with a rear diffuser but the engine undertray needs to be removable to allow for engine access. One can't use rivets to attach the tray in this situation, so RivNuts are used instead. This video demonstrates how I used a simple piece of metal, a vise-grips and a screwdriver as a DIY rivnut installer tool.
August 16 , 2004 - Bala Body Walkaround 3.3MB WM9- Video shows the current state of progress on La Bala bodywork. The black spoltches are low spots in the surface that need to be filled in to make the surface perfectly smooth.
June 11 , 2004 - HotWire Foam Cutter 5.2MB WM9- A clean and relatively painless way of shaping styrofoam.
I created a foam cutting hot wire out of some scrap wood, a piece of nichrome wire and a battery charger. Video also shows a bit of the front of the car with foam almost completed.
May 18, 2004 - La Bala 3D animation 1.6MB MPEG- 3DS Max rendering of body final concept.
I used 3D visualization tools to create the car body in 3D before starting on the real thing. This animation includes a 6'-0" humanoid form standing next to the car to give human scale.
March 2004
December 2003
|
Home 
Videos 
